Filter
Top Products
106
Field Function
Alarm
Enter the alarm issued by the protected device
or a terminal server internal event (internal
events are listed at the end of this chapter) and
press the Enter key.
Routine Parameters
Enter parameters associated with the Action
Routine. Enter values for parameters
associated with the specified Action Routine.
Commas must separate parameters. A comma
is not needed at the end of the field. If you
want to skip a parameter, place a comma for
the parameter and a second one to separate it
from the next parameter. For example, to enter
the first and third parameters (skip the second
parameter), enter two commas in the middle:
1,,3.
Comments
Type any comments you want attached to the
event. Then press the Enter key.
The system confirms that you have added an action item by displaying a
confirming a log entry and displaying the system prompt.
List Action Items – LA Command
The List Action Items command displays the Action Table, which contains
the following information:
•
Alarms - Trigger (alarm or event) for the Action Routine.
•
Routines - Action taken when the alarm is received.
•
Parameters - Parameters associated with the Action Routine.
•
Comments - Description or explanation of the routine or other
information.