Filter
Top Products
87
An inactivity period longer than the Network-Loss Alarm Delay Time will
trigger the alarm .NETDOWN.
Querying Remote Nodes
The Port and Session Control Functions menu includes the
PING
command. The
PING
command is issued to query another device (IP
address) on a network.
Syntax: PING
<Ipaddr>.
Where <Ipaddr> is the IP address of the device
If successful, the reply shows the length of time it took to reach the
device. If the ping is unsuccessful, the message is “Device not
Reachable.”
Rebooting the Terminal Server
You can restart the terminal server by either using the key switch on the
front panel to power-cycle the unit (turn the key to Off then to On – "hard"
boot) or by issuing the
BOOT
command from the command prompt –
"soft" boot.