Filter
Top Products
115
Internal Alarms and Events
In addition to the alarms generated by the Host or HP server system, the
Terminal server supports several internal events. Chapter 8 contains a
complete description of each internal event and standard Action Routines
and required parameters.
Event Description
.AUTHFAIL Event occurs upon receipt of a failed authentication
attempt.
.BAT48HIGH Event occurs when battery voltage crosses over
from an OK condition to a high voltage condition.
Use the SSA command to specify the upper limit.
.BAT48LOW Event occurs when battery voltage crosses over
from an OK condition to a low voltage condition.
Use the SSA command to specify the upper and
lower limits.
.BAT48OK Event occurs when battery changes from a high or
low condition to an OK condition. Use the SSA
command to specify the upper and lower limits.
.BUFREADY Event occurs when a buffer file has been closed
and is ready to be sent.
.CLKCHANGE Event indicating that the internal clock of the
Terminal server has changed.
.DISKCRIT Event occurs when the RAMdisk reaches the
critical level assigned by the Set Disk Parameters
command.