Filter
Top Products
79
Field Function
CONNECT n is chosen, and no CONNECT
message is sent to the terminal server
modem, it reverts to Auto Baud.
Press the space bar until the desired choice
is displayed. When the speed you want
appears in the field, press the Enter key to
select that speed. Speeds available are
CONNECT n, 57600, 38400, 19200, 9600,
4800, 2400, 1200, 300 and Auto.
Char. Length/Parity
Use the space bar to select the character
length and parity characteristics of the
Modem Port. Available entries are 7 or 8
data bits, with Even, Odd, Mark, Space or no
parity.
The Auto entry initiates an auto-parity routine
with the user.
Terminal Emulation
Specify the type of terminal that your
computer is emulating when your computer
is connected to the Modem Port via a remote
modem.
Press the space bar to toggle between TTY
and VT100.
If your computer is emulating a DEC VT-100
terminal, select VT100. If your computer is
not
emulating a DEC VT-100 terminal, select
TTY. After you make your selection, press
the Enter key.
NOTE: Only Sysop sessions are affected.
Sysop Idle Timer
The Sysop idle timer defines the maximum
duration of inactivity time during a Sysop
session before the call is terminated and the
modem is reset.