Filter
Top Products
121
8. ACTION AND EVENT
ROUTINES
What This Chapter Contains
The Terminal server can be programmed to respond to a particular
event or trigger. There are two types of events: Internal and External.
An internal event is generated by the Terminal server automatically in
response to a particular condition, such as a failed authentication
attempt or a low battery. An external event is an alarm received from a
device connected to the Terminal server. Internal events are listed in
this chapter. The user defines all external events and the format must
be as for internal events.
The action that the Terminal server initiates in response to an event is
specified by the Action Routine associated with that event in the Action
Table. A set of Action Routines is included with the Terminal server. A
description and an example of each Action Routine are included in this
chapter.
•
Description of Events
•
Description of Action Routines
NOTE: To see alarms whenever they occur (even if there is not match in
the Action Table), type LOGE ON to select LOG Events ON. To revert
to normal operation in which alarms are not logged unless they match
an entry in the Action Table, type LOGE OFF.