Filter
Top Products
69
Command Function
SWBUF
Switch buffer
Closes the buffer for the specified port and opens
a new one. You will be prompted for the port
number.
BST
Buffer status
Displays the status of all open and closed buffer
files for a specific host port.
OBST
Status of open buffers for each host port.
Displays the status of all open buffer files. Status
includes creation time, file size, and the time and
size at which the buffers will be switched (if
automatic buffering is enabled).
Using FTP to Send Files to an FTP Server
The terminal server supports FTP Client Send commands. Before you
can send a file via FTP, the following must have been done.
• A PPP link or Ethernet connection must be established.
• Parameters must be set in the Set Network Parameters
screen.
After specifying the parameters, you may issue the SEBUF or SEND
command with the appropriate parameters.
Files may be sent using FTP from the terminal server to another device
by issuing the SEND or SEBUF command. However, you must set the
FTP parameters prior to using these commands.
SEND transmits one file; SEBUF is used to send all buffer files from the
specified host port.
Notation used: As in ASCII and XMODEM protocols, the required
parameters are enclosed within angle brackets <>; optional
parameters are enclosed within square brackets [ ].