Filter
Top Products
23
If Regular Callback is selected, you are prompted to enter a phone
number.
NOTE: Enter the phone number as the system needs to dial it.
For example, if you have to dial 9 to get an outside line, or if the
number is in a different area code and you need to dial a 1 first,
enter those numbers as well. Dialing instructions common to all
users (such as dialing 9 to get an outside line) should be changed
in the modem dial string using the Set Modem (SM) command.
Access Option:
Passthru
Passthru only requires the user to enter a user name and the correct
password.
Access Option:
Variable Callback
Variable Callback requires a user name and corresponding password.
After dialing in to the terminal server and entering the correct user name
and password, the user enters a phone number for the terminal server
to call back. The terminal server disconnects and the user hangs up.
The terminal server then calls the user back at the phone number
provided.
When the access option you desire appears on the screen, press the
Enter key to make your selection.
Listing Users – LU Command
Type
LU
at the system prompt, and press the Enter Key to display the
list of users authorized to initiate a Sysop or Host session with the
terminal server. The following information is displayed for each user:
User name
Access class [Acc. Class]
Whether user access is specifically blocked [Blk?]