Filter
Top Products
47
Field Function
Restore Factory Defaults?
Initially No appears on the screen.
Press the space bar to toggle to Yes.
Select Yes to reload the values set at
the factory.
--SNMP Manager Parameters--
PPP link needed for trap?
If the terminal server is not connected
to the same network as its SNMP
Manager, it can reach the manager
over a modem link by using the
“Point-to-Point Protocol” (PPP).
Initially No appears on the screen.
Press the space bar to toggle to Yes.
Set this option to Yes to establish a
modem link to
only one
SNMP
manager. Additional steps may be
necessary to configure the dial-out
process. Select No if the trap will be
sent via the network connection.