Filter
Top Products
41
Field Function
Restore Factory Defaults?
Initially No appears on the screen. Press
the space bar to toggle to Yes. Select Yes
to reload the values set at the factory.
--Network Initialization
Parameters--Start Network
on Power-up?
Initially No appears on the screen. Press
the space bar to toggle to Yes. Yes will
start the network module on unit power-up
using the parameters defined with the SNP
command.
IP Address
(nnn.nnn.nnn.nnn)
Enter the IP address of the terminal
server. Each device on the network must
have its own unique IP address. The IP
address assigned to the terminal server at
the factory may not be appropriate for your
network.
The IP address must be set before the
network module of the terminal server is
started. Once the network has been
started, changes to this parameter will take
effect only after the terminal server is
power-cycled (rebooted).
PPP Address
(nnn.nnn.nnn.nnn)
Enter the PPP address of the terminal
server. This is the IP address that is used
to identify the terminal server over a PPP
link. The network portion of the PPP
address must be different from the IP
address used above.
Subnet Mask
(nnn.nnn.nnn.nnn)
The subnet mask determines which part of
the terminal server's IP address represents
its network number and which part
represents its node number. Obtain an
appropriate value from your network
administrator.