Filter
Top Products
Troubleshooting
Selftest Failures
87
kludge for labproto BP
For the following section of PCI-related chassis codes:
The “1” or “2” is the GSC bus number that the
host is attached to.
Code Name Meaning
8C10 INIT_PCI DINO on GSC bus 1;
tests & PCI init begin
8C11 TEST_PCI_COMPLETE DINO tests complet-
ed for DINO on GSC bus 1
8C12 INIT_PCI_COMPLETE PCI init finished
for DINO on GSC bus 1
8C13 PCI_NOT_FOUND No DINO’s (or CU-
JO’s) found on GSC bus 1
8C14 PCI_TEST_ERR A DINO test failed
on GSC bus 1
8C20 INIT_PCI CUJO on GSC bus 2;
tests & PCI init begin
8C21 TEST_PCI_COMPLETE CUJO tests complet-
ed for CUJO on GSC bus 2
8C22 INIT_PCI_COMPLETE PCI init finished
for CUJO on GSC bus 2
8C23 PCI_NOT_FOUND No CUJO’s (or DI-
NO’s) found on GSC bus 2
8C24 PCI_TEST_ERR A CUJO test failed
on GSC bus 2
Code Name Meaning
8xy0 GECKOBOA_REG Begin GeckoBOA reg-
ister tests
8xy1 GECKOBOA_REG_0100 Failures of Gecko-
BOA register tests
8xy2 GECKOBOA_REG_0105
8xy3 GECKOBOA_REG_0110
8xy4 GECKOBOA_REG_0115
8xyA HOT_SWAP_RETRY Hot Swap retry due
to spin up time
8xy5 GECKOBOA_NIO Begin GeckoBOA DMA
tests
8xy6 GECKOBOA_NIO_0100 Failures of Gecko-
BOA DMA tests
8xy7 GECKOBOA_NIO_0105 8xy8 GECKOBOA_NIO_0110
8xy9 GECKOBOA_NIO_0115 8xyA GECKOBOA_NIO_0120
8xyB GECKOBOA_NIO_0125
Code Name Meaning
9000 NO_SS_CONS Stable Storage con-
sole not found
9001 NO_CONS_FOUND Alternate con-
sole(s) not found
Code Name Meaning
A008 NO_BOOT_SELECTION No bootable device
found
A00F RETRIEVE_PATH_FAILED
A088 NO_BOOT_NO_CONS No console, unable
to boot
A0BD IODC_DEV_NOT_READY ENTRY_INIT returned
-8, device not ready
A0FF UNKNOWN_LAUNCH_FLT
A50F INIT_PRI_PATH_FAILED
A70F INIT_OTHR_PATH_FAILED
Code Name Meaning
C0FF CHASSIS_GSC_SLOT_TEST TEST: Check for
proper GSC slot offsets
C0FF CHASSIS_GSC_SLOT_INIT INIT: Program off-
sets to proper values
C0FF CHASSIS_GSC_SLOT_ERROR FLT: Unable to