Field Replaceable Units
FRU Removal and Replacement
145
Rear Panel
Before removing the Rear Panel, perform the follow-
ing procedures:
• Remove the Main Tray Assembly from the system unit.
• Remove the System Fans
• Remove any option boards
See the section on Removing PCI, EISA, and GSC
Option Boards, earlier in this chapter for more infor-
mation.
Perform the following steps to remove the rear panel:
1 Remove the 7 screws, as shown in Figure 55.
Figure 55 Removing the Rear Panel
2 Move the rear panel away from the main tray until it
clears the connectors.