Filter
Top Products
Field Replaceable Units
FRU Removal and Replacement
149
I/O Extension Board
Before removing the I/O extension board, remove the
Rear Panel.
Perform the following steps to remove the I/O exten-
sion board:
1 Remove one screw holding the I/O extension board to
the main tray, as shown in Figure 57.
2 Slide the I/O extension board to the side to disconnect it
from the backplane, as shown in Figure 57.
Figure 57 Removing the I/O Extension Board
3 Lift the I/O extension board clear of the Main Tray
Assembly.