Filter
Top Products
2. Press the down arrow button until Bluetooth Menu is highlighted, and then press OK.
NOTE: It is required that the Bluetooth Radio is turned on to enable the Bluetooth options in the Bluetooth
Menu.
3. Press the down arrow button until Device Address is highlighted, and then press OK.
The Device Address appears, which is read only.
4. Make a note of the device address. You might need it later.
To install and print using the Microsoft stack
1. Make sure that you have installed the product software on the computer.
NOTE: The purpose of installing the software is to make sure the printer driver is available for the
Bluetooth
®
connection. Therefore, if you have already installed the software, you do not need to reinstall it.
If you want both a USB and a Bluetooth
®
connection to the HP Photosmart, install the USB connection first.
For more information, see the Setup Guide. However, if you do not want a USB connection, select Directly
to the computer on the Connection Type screen. Also, on the Connect Your Device Now screen, select
the check box next to If you are unable to connect your device now... at the bottom of the screen.
2. If you are using an external Bluetooth
®
adapter for your computer, make sure your computer is started and then
attach the Bluetooth
®
adapter to a USB port on the computer. If you have Windows Vista or Windows XP with
Service Pack 2 installed, the Bluetooth
®
drivers are installed automatically. If you are prompted to select a
Bluetooth
®
profile, select HCRP.
If your computer has Bluetooth
®
built in, just make sure the computer is started.
3. On the Windows taskbar, click Start, and then click Printers and Faxes (or click Control Panel, and then
Printers).
4. Click Add a printer).
5. Click Next, and then select A Bluetooth Printer.
6. Follow the onscreen instructions to finish the installation.
7. Print as you would to any printer.
To install and print using the Widcomm stack
1. Make sure that you have installed the HP Photosmart software on the computer.
NOTE: The purpose of installing the software is to make sure the printer driver is available for the
Bluetooth
®
connection. Therefore, if you have already installed the software, you do not need to reinstall it.
If you want both a USB and a Bluetooth
®
connection to the HP Photosmart, install the USB connection first.
For more information, see the Setup Guide. However, if you do not want a USB connection, select Directly
to the computer on the Connection Type screen. Also, on the Connect Your Device Now screen, select
the check box next to If you are unable to connect your device now... at the bottom of the screen.
2. Click the My Bluetooth Places icon on the desktop or in the taskbar.
3. Click View devices in range.
4. Once the available printers are discovered, double-click the name of HP Photosmart to finish the installation.
5. Print as you would to any printer.
Set up a Bluetooth connection 11
Finish setting up the HP Photosmart