Filter
Top Products
Resume light is flashing
1 Resume light
If the Resume light is flashing, check the following conditions:
● The printer might be out of paper.
Place paper in the input tray, and then press the Resume button.
● There might be a paper jam.
For information about clearing a paper jam, see Paper jam.
● The print cartridges are the correct print cartridges for the printer and are properly
installed.
For more information, see Print cartridges and Installation instructions.
● The printer might be stalled.
For more information about correcting the problem, see Printer is stalled.
Both lights are flashing
The printer might need to be restarted.
1. Press the Power button to turn off the printer, and then press the Power button to
restart the printer.
Proceed to step 2 if the lights continue to flash.
2. Press the Power button to turn off the printer.
3. Disconnect the printer power cord from the electrical outlet.
4. Reconnect the printer power cord to the electrical outlet.
5. Press the Power button to turn on the printer.
Front USB port lights are flashing
If the front USB port lights are flashing, follow these instructions.
Document prints slowly
Multiple software programs are open
The computer resources are insufficient for the printer to print at its optimum speed.
HP Photosmart Software Help 89