Filter
Top Products
Caution CENTER CONDUCTOR MAY SHORT TO SHIELD. Each
channel’s center conductor may momentarily short to the
shield when the channel is opened or closed. Use only
resistive (50Ω or 75Ω) or current-limited (<1 A) inputs with less
than 0.1 µF total capacitance.
Caution STATIC-SENSITIVE DEVICE. Use anti-static procedures when
removing, configuring, and installing a module. The
multiplexer modules are susceptible to static discharges. Do
not install a multiplexer without its metal shield attached.
Connecting User Inputs
User inputs to the RF multiplexers are made through user-supplied male BNC
connectors to the female BNC connectors on the modules. Figure 2-1 shows
the multiplexer female BNC connectors and associated channel numbers.
Figure 2-1. BNC Connector Locations
18 Configuring the HP E1366A/E1367A RF Multiplexers Chapter 2