Filter
Top Products
Typical Multiplexer Configurations
Typical RF multiplexer configurations are:
• Standard configuration (2 x 4:1 multiplexer)
• Tree configuration (1 x 12:1 multiplexer)
• Matrix-type configuration (4:1 to 4:1 multiplexer)
Standard
Configuration
Figure 2-2 shows the standard configuration (2 x 4:1) for the RF
multiplexers. With this configuration, you can switch channels 00-03 to
com 00 and switch channels 10-13 to com 10. One channel per bank can be
connected to its common at a time.
Figure 2-2. Typical Standard Configuration
20 Configuring the HP E1366A/E1367A RF Multiplexers Chapter 2