Filter
Top Products
51
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Enter 0 at the prompt. The system reboots in full startup mode and displays the following information:
Starting......
********************************************************************************
* *
* HP 5120-24G-PoE+ EI TAA Switch with 2 Interface Slots BOOTROM, Version 205 *
* *
********************************************************************************
Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
Creation date : Feb 23 2011, 09:36:58
CPU Clock Speed : 264MHz
BUS Clock Speed : 33MHz
Memory Size : 128MB
Mac Address : 3ce5a62f8dde
Press Ctrl-B to enter Boot Menu... 5
In full startup mode, you must press Ctrl + B within five seconds to access the Boot menu. If you perform
no operation or press any key other than Ctrl + B within five seconds, the system automatically starts up
and displays the following information:
Auto-booting...
Decompress Image................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
..............OK!
Board checking.......................LSP1LTSUD
SDRAM fast selftest........................OK!
Flash fast selftest........................OK!
CPLD selftest..............................OK!
Switch chip selftest.......................OK!
PHY selftest...............................OK!
Please check leds....................FINISHED!