Filter
Top Products
69
Appendix B FRUs and compatibility matrixes
This appendix describes the FRUs available for the 5120 EI and 5120 SI switches and their compatibility.
Interface cards (only for the 5120 EI switches)
The interface cards in this section are available for all 5120 EI switches but the 5120-24G EI and
5120-48G EI switches.
Card
model
Product
code
Description Support for IRF
Compatible transceiver
modules/cables
LSPM2GP2P JD367A
Provides two Gbps
SFP fiber ports
No
See “GE SFP transceiver
modules.”
NOTE:
The
card does not support the
transceiver module coded
JD089B.
LSPM2SP2P JD368B
Provides two 10
Gbps SFP+ fiber
ports
Yes
See “10-GE SFP+ transceiver
modules” and
“SFP+ cables.”
LSPM1XP2P JD359B
Provides two 10
Gbps XFP fiber ports
Yes
See “10-GE XFP transceiver
modules.”
LSPM1XP1P JD361B
Provides one 10
Gbps XFP fiber port
Yes
See “10-GE XFP transceiver
modules.”
LSPM1CX2P JD360B
Provides two 10
Gbps copper ports
Yes See “CX4 cables.”
NOTE:
For more information about the interface cards, see the user guides for the interface cards.
SFP/SFP+/XFP transceiver modules and SFP+/CX4
cables (only for the 5120 EI switches)
NOTE:
• To guarantee the functionality of the SFP/SFP+/XFP ports, use only HP transceiver modules.
• The transceiver modules available for this switch series are subject to change over time. For the most
up-to-date list of transceiver modules, consult your HP sales representative or technical support
engineer.
• For the transceiver module specifications, see HP A-Series Switches Transceiver Modules User Guide.
For information about installing a transceiver module, see
Pluggable SFP/SFP+/XFP Transceiver
Modules Installation Guide
.