Filter
Top Products
Control panel message Description Recommended action
ORDER <COLOR> CARTRIDGE
alternates with
Ready
The identified print cartridge is nearing the
end of its useful life. The printer is ready and
will print for the estimated number of pages
indicated.
Order the identified print cartridge. Printing
will continue until REPLACE <COLOR>
CARTRIDGE appears.
NOTE Estimated pages remaining
is based upon historical page
coverage with this supply.
See Supplies and accessories for more
information.
NOTE To prevent this message
from appearing, in the SYSTEM
SETUP menu, set ORDER AT to
0%.
ORDER SUPPLIES
alternates with
Ready
More than one supply item is low. 1.
Press
to identify which supplies
should be ordered.
2. Order the supplies. Printing can
continue until REPLACE SUPPLIES
appears.
or
Press
for help.
See
Supplies and accessories for more
information.
PAPER PATH JAM FRONT DOOR
alternates with
For help press
A page is jammed in the paper path. Open the front door and remove any jammed
media.
Paused
alternates with
To return to Ready press the STOP key
The printer has paused. Press Stop to resume printing.
Performing upgrade A firmware upgrade is in process. No action necessary. Do not turn off the
printer.
Performing... PAPER PATH TEST The printer is performing a paper-path test. No action necessary.
PRINTING STOPPED
To continue press
This message appears when a Print/Stop test
runs and the time expires.
Press to continue printing.
Printing... CONFIGURATION The printer is generating the configuration
page. The printer will return to the Ready
state when the page has printed.
No action necessary.
Printing... DEMO PAGE The printer is generating the demo page. The
printer will return to the Ready state when the
page has printed.
No action necessary.
Printing... DIAGNOSTICS PAGE The printer is generating the diagnostics
page. The printer will return to the Ready
state when the page has printed.
No action necessary.
ENWW Control-panel messages 129