Filter
Top Products
5. Press or to select the appropriate personality, and then press to set the personality.
6. Press Menu to return to the Ready state.
Clearable Warnings feature
NOTE This feature is available for the HP Color LaserJet 3000 and 3800 Series printers only.
Use this feature to determine the display time of control-panel clearable warnings by selecting ON or
JOB. The default value is JOB.
●
ON: Clearable warnings appear until you press
.
●
JOB: Clearable warnings appear until the end of the job for which they were generated.
To set the Clearable Warnings feature
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight SYSTEM SETUP, and then press .
4. Press
to highlight CLEARABLE WARNINGS, and then press .
5. Press
or to select the appropriate setting, and then press to set the selection.
6. Press Menu to return to the Ready state.
Auto Continue feature
Use this feature to determine printer behavior when the system generates an auto-continuable error.
ON is the default setting.
●
ON: An error message appears for ten seconds before automatically continuing to print.
●
OFF: Any time the printer shows an error message, the print job pauses until you press
.
To set the Auto Continue feature
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight SYSTEM SETUP, and then press .
4. Press
to highlight AUTO CONTINUE, and then press .
5. Press
or to select the appropriate setting, and then press to set the selection.
6. Press Menu to return to the Ready state.
38 Chapter 2 Control panel ENWW