Filter
Top Products
To set the Manually Feed Prompt feature
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight SYSTEM SETUP, and then press .
4. Press
to highlight TRAY BEHAVIOR, and then press .
5. Press
to highlight MANUALLY FEED PROMPT, and then press .
6. Press
or to select ALWAYS or UNLESS LOADED.
7. Press
to save the selected behavior, and then press Menu to return to the Ready state.
To set the PS Defer Media feature
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight SYSTEM SETUP, and then press .
4. Press
to highlight TRAY BEHAVIOR, and then press .
5. Press
to highlight PS DEFER MEDIA, and then press .
6. Press
or to select ENABLED or DISABLED.
7. Press
to save the selected behavior, and then press Menu to return to the Ready state.
To set the Use Another Tray feature
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight SYSTEM SETUP, and then press .
4. Press
to highlight TRAY BEHAVIOR, and then press .
5. Press
to highlight USE ANOTHER TRAY, and then press .
6. Press
or to select ENABLED or DISABLED.
7. Press
to save the selected behavior, and then press Menu to return to the Ready state.
To set the Size/Type Prompt feature
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight SYSTEM SETUP, and then press .
4. Press
to highlight TRAY BEHAVIOR, and then press .
5. Press
to highlight SIZE/TYPE PROMPT, and then press .
ENWW Changing printer control-panel configuration settings 35