HP (Hewlett-Packard) 4500 Printer User Manual


 
108 Printer Interfaces
EN
5 Press I
TEM
until CFG ETALK=NO * displays.
6 Press V
ALUE
until CFG ETALK=YES displays.
7 Press S
ELECT
once. CFG ETALK=YES * displays.
8 Press I
TEM
. PHASE=1 or PHASE=2 displays.
9 Press I
TEM
to retain the value and continue, or press V
ALUE
to
change the phase parameter.
10 Press S
ELECT
to save the new value.
11 If you are finished, press G
O
to return the printer to the READY
state.
– OR –
See the appropriate sections for other protocols that will be used.
Disabling Network Protocols (Optional)
By factory default, all supported network protocols are enabled.
Disabling unused protocols has the following benefits:
decreases printer-generated network traffic
prevents unauthorized users from printing to the printer
provides only pertinent information on the configuration page
allows the printer control panel to display protocol-specific error
and warning messages
To reach network protocols
1 Press M
ENU
until HP EIO 1 MENU displays.
2 Press I
TEM
until CFG NETWORK=NO * displays.
3 Press V
ALUE
until CFG NETWORK=YES displays.
4 Press S
ELECT
once. CFG NETWORK=YES * displays.
5 In the sections that follow, find the protocol that you want to
disable.