EN
Chapter 3 67
Loading Media into Tray 3
Tray 3 adjusts for Letter, Legal, A4, JIS
B5, Custom (B5 ISO), and Executive
paper. The printer automatically detects
the media size in Tray 3 based on the
tray’s physical configuration and the
position of the media-size knob.
To load media into Tray 3
CAUTION
Do not print cardstock, labels, and
envelopes from Tray 3. This media
should be printed only from Tray 1.
Do not overfill the input tray. Overfilling
trays can cause jams in the printer.
1 Remove Tray 3 and place it on a flat
surface.
2 Set the rear media-length guide by
squeezing the release latch and
sliding the guide to the length of
media you are loading.
3 For special-size media, flip up the
special media guide.
4 Squeezing the release latch, slide
the media-width guides all the way
open.
1
3
4
2