Filter
Top Products
Section 3: Printer Set Up And Network Configuration
3-14
Note: IntelliTech recommends that the ‘IP Config’ (address boot) setting
= ‘Static,’ that the ‘Timeout’ setting = ‘0,’ and that the ‘Keepalive Timer’
= 1.
Setting the IP address boot to ‘Static’ ensures that the print server retains
a permanent IP address. This is important in order to maintain print
queue settings in systems that dynamically assign IP addresses.
Setting the Timeout to ‘0’ will ensure that the IntelliBar printer remains in
constant contact with the host.
Setting the Keepalive Timer to ‘1’ will provide frequent confirmation to
the host that the print server is still active on the network.
To set the IP address boot, Timeout and Keep Alive Timer, click on the
TCP/IP tab in network configuration page.