HP (Hewlett-Packard) IBM AS/400 Printer User Manual


 
Section 4: AS/400, iSeries Host Set Up
4-19
F. Remote Location name (RMTLOCNAME). Enter the IntelliBar AS Net print server IP
address.
G. TCP/IP port (PORT). Enter 5001.
H. TCP/IP activation timer (ACTTMR). Enter the number of seconds for PSF/400 to wait
for the IntelliBar printer to respond to an activation request. If the printer will be used
only by one system, use the default value (170 seconds). If the printer will be used
by more than one system, select *NOMAX.
Configure the V4R5, V5R1 and V5R2 AFP description by typing the following commands on the
command line and completing the recommended settings:
Note. For the RMTLOCNAME (‘0.0.0.0’) entry, enter the IntelliBar
AS Net print server IP address.
CRTPSFCFG PSFCFG(M48ASN) IPDSPASTHR(*YES) RLSTMR(*SEC15) TEXT
(<M48 AS Net Printer>) RMTLOCNAME (‘0.0.0.0’) PORT(5001)
The CRTPSFCFG screen will appear as follows:
PSF configuration . . . . . . . . . : M48ASN
Library . . . . . . . . . . . . . . : QGPL
User resource library . . . . . . . : *JOBLIBL
IPDS pass through . . . . . . . . . : *YES
Activate release timer . . . . . . : *NORDYF
Release timer . . . . . . . . . . . : *SEC15
Restart timer . . . . . . . . . . . : *IMMED
SNA retry count . . . . . . . . . . : 2
Delay time between retries . . . . : 0
Blank page . . . . . . . . . . . . : *YES
Page size control . . . . . . . . . : *NO
Resident fonts . . . . . . . . . . : *YES
Resource retention . . . . . . . . : *YES
Edge orient . . . . . . . . . . . . : *NO
Remote location:
Name or address . . . . . . . . : ‘0.0.0.0’
TCP/IP port . . . . . . . . . . . . : 5001
TCP/IP activation timer . . . . . . : 170
PSF defined options . . . . . . . . : *NONE
Text description . . . . . . . . . : M48 AS Net Printer
Device resource library list. . . . : *DFT
The OS/400 V4R5, V5R1 and V5R2 configurations are now complete. Go to Section 4.8,
Verifying the IPDS Configuration on AS/400.
4.8 VERIFYING THE IPDS CONFIGURATION ON AS/400
A. Start the Printer. Turn the printer on and wait until the printer operator panel displays
‘ONLINE READY.’