Filter
Top Products
Section 4: AS/400, iSeries Host Set Up
4-18
Message queue . . . . . . . . . . : MSGQ *CTLD
Current message queue . . . . . . : QSYSOPR
Library . . . . . . . . . . . . : QSYS
Activation timer . . . . . . . . . : ACTTMR 170
Image configuration . . . . . . . : IMGCFG *NONE
Maximum pending requests . . . . . : MAXPNDRQS 6
Print while converting . . . . . . : PRTCVT *YES
Print request timer . . . . . . . : PRTRQSTMR *NOMAX
Form definition . . . . . . . . . : FORMDF F1C10110
Library . . . . . . . . . . . . : *LIBL
Character identifier . . . . . . . : CHRID *SYSVAL
Remote location . . . . . . . . . : RMTLOCNAME
Name or address . . . . . . . . : 0.0.0.0
User-defined object . . . . . . . : USRDFNOBJ *NONE
Object type . . . . . . . . . . : *NONE
Data transform program . . . . . . : USRDTATFM *NONE
User-defined driver program . . . : USRDRVPGM *NONE
Dependent location name . . . . . : DEPLOCNAME *NONE
Allocated to:
Job name . . . . . . . . . . . . . : PT
User . . . . . . . . . . . . . . : QSPLJOB
Number . . . . . . . . . . . . . : 123456
Text . . . . . . . . . . . . . . . : TEXT *BLANK
User-defined options . . . . . . . : USRDFNOPT
-----------------User-defined options------------------
* * * * * E N D O F L I S T I N G * * * * *
4.7.2 V4R5, V5R1 and V5R2 CRTPSFCFG Command.
The CRTPSFCFG command is used to configure AFP for OS/400 V4R5, V5R1 and V5R2.
Use the following user defined settings to create the AFP description:
A. PSF configuration (PSFCFG). Enter a name or description for the IntelliBar AS Net
printer being configured (ex., M48ASN). The name must match the USRDFNOBJ name
in the printer CRTDEVPRT DEVD command.
B. Library. Select QGPL.
C. IPDS pass through (IPDSPASTHR). Select *YES to print SCS files (transforms SCS
into IPDS). Select *NO to print only IPDS files.
D. Activate release timer (ACTRLSTMR). Select *NORDYF. This activates the release timer
when there are no spooled files in the output queue with a Ready Status (RDY) after
the last spooled has printed. *NORDYF provides that all RDY files are printed before
releasing the session. *NORDYF does not terminate the writer).
E. Release timer (RLSTMR). Enter a value equal to or greater than the TCP/IP
TIMEOUT setting on the IntelliBar print server. IntelliTech recommends *SEC15.
This sets the time PSF/400 maintains a session with the IntelliBar when there are no
Ready Status (RDY) spooled files.