Filter
Top Products
ENWW Using the Embedded Web Server 105
Link settings (For wired 10/100TX networks only) Set the network link
speed(10 or 100 Mbps) and communication mode (full- or
half-duplex) for HP Jetdirect 10/100TX print servers. The
available settings are listed below.
CAUTION: If you change the link setting, network
communications with the print server and network device may
be lost.
● AUTO: (Default) The print server uses autonegotiation to
match the network’s link speed and communication mode. If
autonegotiation fails, 100TXHALF is set.
● 10TXFULL: 10 Mbps, full-duplex operation
● 10TXHALF: 10 Mbps, half-duplex operation
● 100TXFULL: 100 Mbps, full-duplex operation
● 100TXHALF: 100 Mbps, half-duplex operation
Primary DNS
Server
Specify the IP address of the primary DNS (Domain Name
System) server.
Secondary DNS
Server
Specify the IP address of a secondary DNS server to use if the
primary DNS server is unavailable.
Scan Idle Timeout Specifies the number of seconds that an idle connection for
scanning is allowed to remain open. The maximum is 3600, and
the default is 300. If set to 0, the timeout is disabled and the
connection will remain open until closed by the network system
that is accessing the device.
Locally
Administered
Address
Specifies a locally administered address (LAA) that replaces the
factory-assigned LAN Hardware (MAC) address. If LAA is used,
a user-specified string of exactly 12 hexadecimal digits must be
entered.
For Ethernet print servers, the LAA address must start with
hexadecimal X2, X6, XA, or XE, where X is any hexadecimal digit
0 through F.
The default address is the factory assigned address.
Syslog Facility Specify the encoded source facility of a message (for example,
to identify the source of selected messages during
troubleshooting). By default, the HP Jetdirect print server uses
LPR as the source facility code, but local user values of local0
through local7 can be used to isolate individual or groups of print
servers.
Table 4.5 Miscellaneous Settings (2 of 4)
Item Description