Filter
Top Products
ENWW HP Jetdirect Configuration Page 197
16 NOT CONFIGURED (Ethernet) The HP Jetdirect print server has not been
configured for NetWare. Use the installation software,
embedded Web server, or other tools to configure the print
server for NetWare networks.
17 UNABLE TO FIND
SERVER
(Ethernet) The HP Jetdirect print server was unable to find
the NetWare print server (Remote Printer mode) or file
server (Queue Server mode). (There was no response to
service queries for advertising print servers or file servers
that matched the configured print server or file server
name.)
Make sure that the print server or file server is running and
that the print server or file server name configured on the
HP Jetdirect print server matches the actual name used by
the print server or file server. Also make sure that all cables
and routers are functioning correctly.
18 PASSWORD
ERROR
The HP Jetdirect print server detected that the password for
the NetWare print server object is wrong. Use a NetWare
utility (such as PCONSOLE) to erase the password for the
print server object. When the HP Jetdirect print server logs
on again, it sets a new password.
Note: When multiple file servers are configured, the error is
only displayed on the configuration page if none of the file
servers are connected.
19 NO QUEUE
ASSIGNED
The HP Jetdirect print server detected that the print server
object has not been assigned any queues to service. Assign
queues to the print server object using printer installation or
NetWare utilities.
Note: When multiple file servers are configured, the error is
only displayed on the configuration page if none of the file
servers were successfully connected.
1A PRINTER NUMBER
NOT DEFINED
A NetWare printer number for this printer has not been
configured. Assign a valid printer number to the HP Jetdirect
print server. Use a NetWare utility (such as PCONSOLE),
the Jetdirect embedded Web server, or other tool to assign
a printer number.
1B PRINTER NUMBER
IN USE
The NetWare printer number assigned to the printer is
already in use by another printer. Assign an unused printer
number. This may also occur when a printer is powered
off/on, in which case the error goes away after the print
server times out and detects the lost connection.
Table 9.9 Error Messages (3 of 10)
Error Code and
Message
Description