Filter
Top Products
ENWW The HP Jetdirect Control Panel Menu 221
RESET
SECURITY
Specify whether the current security settings
on the print server will be saved or reset to
factory defaults.
● NO (default): The current security
settings are maintained.
● YES: Security settings are reset to factory
defaults.
LINK SPEED (10/100Base-TX print servers only) Selects
the network link speed and communication
mode for the 10/100TX print server. For
proper communications, the Jetdirect
settings must match the network.
AUTO: (Default) The print server will
automatically configure itself to match the
network’s link speed and communication
mode. If it fails, 100TX HALF is set.
10T HALF: 10Mbps, half-duplex operation.
10T FULL: 10 Mbps, full-duplex operation.
100TX HALF: 100 Mbps, half-duplex
operation
100TX FULL: 100 Mbps, full-duplex
operation
Table B.1 HP Jetdirect Control Panel Menu (7 of 7)
Menu Item Options Description of settings