Filter
Top Products
ENWW HP Software Solutions Summary 21
2. To install the software and set up the print path to the printer,
follow the instructions provided with the software. Contact your
network administrator to get the IP address or URL of the
printer to complete the setup.
HP Software System Requirements
● Computer running Microsoft Windows NT 4.0 (Intel-based) or
Windows 2000
● HP Jetdirect print server with IPP enabled.
HP Software Supported Proxies
Web proxy with support for HTTP v1.1 or greater (may not be
needed if printing over an intranet).
Microsoft Supplied Software
Note Contact Microsoft for support of Windows IPP
software.
Windows 2000/XP/Server 2003 Integrated Software
On Windows 2000/XP/Server 2003 systems, an alternative to using
the HP supplied software is to use the IPP-client software
integrated with the Windows system. The IPP implementation on
the HP Jetdirect print server is compatible with the Windows
system IPP-client software.
To set up a print path to an HP Jetdirect-connected Internet printer
using the Windows 2000/XP IPP-client software, proceed as follows:
1. Open the Printers folder (click Start, select Settings, and
select Printers).
2. Run the Add Printer wizard (double-click Add Printer), then
click Next.
3. Select the option for a network printer and click Next.