Filter
Top Products
18
13 The
Printer Installed Successfully dialog box displays. Choose from one of the following
options.
• Select Yes to install additional printers and then click Next. The New Printer
Installation
dialog box appears.
• Select No to complete the installation, and click Finish.
The installation of the printer is now complete. If prompted, restart your system.
LPR Connection
When the printer has a built-in network interface, you can print over a network using an LPR
port. This section describes how to install the printer driver when the computer and printer are
connected using a LPR port connection.
To install using an LPR Port Connection:
1 Ensure both the computer and printer are turned off.
2 Connect to the computer and printer using a network cable. Once connected, power on both
devices.
3 Insert the Kyocera Software Library CD-ROM into the CD drive.
NOTE
• Ensure the printer is ready to print (remove packing materials, insert paper
and any toner or ink cartridges) before connecting the cable.
• For further details on connecting using a network cable, refer to the printer's
Operation Guide.
• If the Welcome to the Found New Hardware Wizard dialog box appears,
click
Cancel.