Filter
Top Products
Printer Properties
43
5 Select the
Ignore Application Collation check box to bypass the Collate setting in the
application, and give priority to the printer driver setting.
Auto Configuration
The Auto Configuration Tool lets users automatically configure the physical device settings of
a printer through the Device Settings properties page if they are connected to the printer over a
network.
Auto Configure can detect printer devices such as input devices, output devices, RAM disk
size, and hard disk size. Then it updates the Device Options list on the Device Settings
properties page. Auto Configure keeps the printer driver’s Device settings consistent with the
actual printer devices.
Auto Configure currently supports these ports for Windows operating systems:
• Windows 98 & ME – KPrint ports (Raw mode, LPR, and IPP) only
• Windows NT 4.0 – KPrint ports (Raw mode, LPR, and IPP) only
• Windows 2000 – TCP/IP Ports and KPrint Ports (Raw mode, LPR, and IPP)
• Windows XP – TCP/IP Ports only
1 Click Auto Configure.
NOTE
Click Printing Preferences on the General tab in the Properties dialog box to
access collated printing options.
NOTE
TCP/IP port can be either an IP address or the printer name (Host name).
Windows 95 is not supported by KACT.