Filter
Top Products
92
4 Set either
Finisher (Face-down) or Finisher (Face-up) as the output destination, then
enable the
Offset check box in the Finishing Options section.
5Click
OK to return to the Print dialog box, and click OK to start printing.
After the first set is delivered, the second set will be delivered offset to the side. Then the
printer delivers the third set in the same position as the first and the fourth set in the same
position as the second.
Punch
The Punch feature inserts holes in each printed page.
The
Punch feature is available on printers with supported optional finisher installed.
After installing the printer driver, optional equipment must be selected in the driver in order to
use the punch option (device settings). For further details, refer to Installing Optional Devices
on page 30.
Using the Punch
1In the Properties dialog box, click the Output tab.
2 Select either
Finisher (Face-down) or Finisher (Face-up) as Output destination.
NOTE
Punch and Booklet Printing cannot be used simultaneously.