Filter
Top Products
Using Optional Equipment
93
3 Select the
Punch check box in the Finishing Options section, and select the number of
holes.
4Click
OK to return to the Print dialog box, and click OK to begin printing.
5 Holes are punched in each printed page.
Cover Mode, Page Insert, and Transparency Interleaving
This section describes the cover mode, page insert, and transparency interleaving features of
the printer driver. When the Cover Mode, Page Insert, and Transparency Interleaving options
are used with the multi-purpose tray, cassette mode (the default setting), must be set. For
further details, refer to the print system's Operation Guide.
• Cover Mode: Adds a front or back cover to your document.
• Page Insert: Inserts blank or printed pages before pages in your document.
• Transparency Interleaving: Inserts a blank or printed page between each transparency.
Printing with
Covers
For your document's front cover or front and back covers, you can insert and print on paper
that is a different weight or color than the paper for the body of the document. You can also
specify cover printing when completing booklet printing settings. The paper used for printing
the document body is specified in the
Media settings of the Properties dialog box. The source
of the cover paper is specified by adjusting settings in the
Advanced Media Settings dialog
box. You can also print on the covers.
A duplexer must be connected in order to print using the Front Inside or Back Outside. You
must also specify
Print on Both Sides (Duplex) on the Layout tab.
Although the
Cover Mode and Page Insert may be used simultaneously, they cannot be used
with the
Transparency Interleaving option.
For further details on printing with covers in the booklet printing settings, refer to Booklet
Printing on page 102.
1 From the application’s
Print dialog box, access the printer Properties. Select Print from
the
File menu and select Properties.
2In the
Properties dialog box, click the Media tab, and then click Advanced....