Filter
Top Products
Chapter 1 General Information
8
Removing the System Board Assembly
CAUTION The system board assembly weighs approximately 20 lbs. (9 kgs.). Removing the
board assembly with the assistance of another person is advised.
6. Pull the board out until it clears the chassis guides.
7. Slide the system board assembly from the chassis and place it metal plate side down on an
anti-static pad.
CAUTION Do not operate the HP NetServer for more than sixty minutes without first installing
all covers and the front bezel. Operating the system without all covers in place
reduces critical cooling airflow over some components, such as hard disk drives and
processors. Operating the system without all covers in place may result in failure of
these components.