HP (Hewlett-Packard) LH 6000 Printer User Manual


 
Chapter 2 System Information
28
Depth
724.2 mm (28.5 in)
Weight
72.6 – 78.5 kg (160 - 173 lb.)
HP NetServer LH 6000r
Height
354.7 mm (14 in)
Width
482.6 mm (19 in)
Depth
749.2 mm (29.5 in)
Weight
72.6 – 78.5 kg (160 - 173 lb.)
Power Requirements
Power Supply Specifications: Three power supplies, plus one for redundancy
Power supply type
Input voltages:
Nominal:
Range:
Wide range, PFC
100 to 240 VAC, 11.7A/5.6 A at 50/60 Hz
90 to 264 VAC at 47 - 63 Hz
Power availability:
780 W continuous
Minimum System Requirements
Voltage Volt/Amps Amps Watts
100 1177 11.7 1166
120 1153 9.6 1141
200 1120 5.6 1099
230 1117 4.9 1095
Switch Settings
The configuration switch, S1, is located on the lower left of the system board of the system board assembly.
To change the switch settings, it is recommended that the system board assembly be removed from the
chassis.
NOTE Only the first four switches set the processor speed. Do not change the processor
speed switch settings.