Filter
Top Products
Chapter 1 General Information
14
Light Pipes Display PCI LEDs
PCI Hot Plug LEDs (Internal)
Amber Green Status Indicated Your Action
Off On
Power to the slot is on, and the slot is
operating normally.
Do not remove the board from the slot.
On On
The slot needs attention, but power
to the slot is on.
Do not remove the board from the slot.
On Off The slot needs attention, but power
to the slot is off.
You can safely remove the board from this
slot.
Off Off Power to the slot is off. You can safely remove the board from this
slot.
Power Supply LEDs
Interpret the green LEDs on the power supplies in this way:
Green LED Indicates this HP NetServer Status:
Steady Green The system is powered up.
Flashing The system is in stand-by or power-save mode.
Off The AC line is unplugged or the power supply has failed.
LAN LEDs
The LH 6000 has two LEDs on either side of the RJ-45 connection. Interpret the LEDs in this way:
Local Area Network LED Status
Green LED Yellow LED LAN Status:
On/Flashing Off The LAN is connected and data is being transferred at 10Mbps.
On/Flashing On The LAN is connected and data is being transferred at 100Mbps.
Off Off The LAN is not connected or is not operational.
Main Menu
This is the status screen default display for the LH 6000:
HP NetServer
LH 6000
1. To reach the main menu from this default screen, press the Enter button.
NOTE The status screen displays two lines of an entire menu at a time.
This is the entire Main Menu:
***Main Menu****
>Event Log
>FW Info
>System Info
>Component Info
>Service
>Adjust Contrast