Filter
Top Products
Making Connections
Connecting External Devices
74 Reference Guide
To connect to a docking product
Pavilion models
Docking is not supported on Pavilion models.
A docking product provides your computer with external connections that you can leave
in place whenever you remove the computer from your desk. Instead of disconnecting
and reconnecting peripheral devices, you can simply undock and dock the computer.
For more information about using docking products, see the User’s Guide that shipped
with your dock.
Installing a docking tray
Your dock requires a tray that accommodates your specific computer model. Install this
tray prior to connecting the computer to the dock. If you don’t have a tray labeled for the
OmniBook 6000, you’ll need to purchase HP accessory F2012A.
1. Slide the rear of the tray into the dock as shown on the dock label.
2. Push down firmly on both sides of the tray until it snaps into place.
To remove a tray from the dock, pull the latch (at the center front of the dock) towards
you until the tray pops free.
Docking the computer
The computer can be on, suspended, or off when docking.
1. Connect power to the dock—the type of connection depends on the dock. See the
manual that came with the dock.