Filter
Top Products
HP OfficeJet Pro User’s Guide 12-5
Front Panel Messages
Message What You Should Do
Power Save On. The front panel displays this message when the OfficeJet Pro
has not been used for 12 hours or more. Press any button on
the front panel or load originals in the automatic document
feeder.
Door Open. Close cartridge
door.
Close the print cartridge door.
Paper Jam. Press and hold
Resume to eject paper.
To clear the paper jam, press and hold the Select/Resume
button. The paper should eject. If this does not work, refer to
the procedures on page 12-1.
If only one or two sheets of paper are in the paper tray, the
OfficeJet Pro might not pick up the paper properly, causing a
jam in the copier.
Remove the papers that are jammed, and add more paper to
the paper tray.
ADF Paper Jam. Refer to “How to Clear a Paper Jam in the Automatic
Document Feeder” on page 12-1.
Busy. Can’t start another
copy job.
You will see this message when you try to start a new copy
job before the first job is complete, or you try to change front
panel settings while a copy job is in progress.
Wait until the first copy job is complete before trying to start
another.
Out of Paper. Replace paper
then press Resume.
If the paper tray is empty, load paper in the paper tray, and
press Select/Resume.
If the paper is not inserted correctly, adjust the paper, then
press Select/Resume.
Remove original from the
document glass.
Remove the original from the document glass, then press the
Select/Resume on the front panel to continue.
Remove and check (black or
color) cartridge.
One of the print cartridges is either incorrectly installed, the
wrong type, or defective.
Remove the print cartridge (black or tri-color), and then
replace it in the carriage stall.
Make sure to remove the tape from the print cartridge, and
close the latch securely.
No Cartridge. Insert (black
or color) cartridge.
A print cartridge is missing. Insert the missing cartridge.
Remove and check black
cartridge. Verify Part
Number: C51645A.
The wrong black cartridge may be installed. Remove it, and
replace it with the correct cartridge, part number C51645A.