Filter
Top Products
5-48 The PCL Print Model EN
Fill Rectangular Area
The Fill Rectangular Area command determines the type of pattern
used to fill the rectangle.
? * c # P
Note If a foreground color is selected, solid, shaded, and cross-hatch
patterns are printed in the foreground color. User-defined patterns are
not affected by the foreground color, but can contain color if they are
defined as such. Solid white fills are not affected by foreground color.
Black fill—fills the rectangular area with black fill or with the current
foreground color.
White fill—erases any fill in the rectangular area (it fills the
rectangular area with white fill). Pertaining to white fills, the pattern
transparency mode is always “opaque” (that is, the white pixels
always have an effect on the destination).
Shaded fill—fills the rectangular area with one of eight shading
patterns as specified by the Pattern ID command.
Cross-Hatch fill—fills the rectangular area with one of the six
cross-hatched patterns as specified by the Pattern ID command.
User-defined fill—fills the rectangular area with custom pattern data
as specified by the Pattern ID command and downloaded by the
User-Defined Pattern command.
Current Pattern—fills the rectangular area with the current pattern.
# = 0 - Solid black or foreground color
1 - Solid white fill
2 - Shaded fill
3 - Cross-hatch fill
4 - User-defined pattern fill
5 - Current pattern fill
Default =0
Range = 0 - 5 (out-of-range values are ignored)