Filter
Top Products
5-54 The PCL Print Model EN
Shaded Fill
To print a 900 by 1500 Unit 25% shaded rectangle (3 inches by
5 inches at 300 units-per-inch), perform the following steps.
1 Position the cursor:
2 Specify the width of the rectangle:
3 Specify the height of the rectangle:
4 Specify the Pattern ID:
?*p300x400Y This moves the cursor to PCL Unit
position (300, 400) within the PCL
coordinate system.
?*c900A This sets the rectangle width to 900 PCL
Units (3 inches at 300 units-per-inch).
?*c1500B This sets the rectangle to 1500 PCL Units
(5 inches at 300 units-per-inch).
?*c25G This sets the Pattern ID to 25.