Filter
Top Products
D-18 Modifying Output Color (Color LaserJet, 5, 5M, DeskJet) EN
Viewing Illuminant
Printed colors undergo a hue shift when viewed under different
illuminations (for example, fluorescent, tungsten, or daylight). Colors
with spectral characteristics outside the range of an illumination
source are not received, changing the appearance of mixed colors.
The Viewing Illuminant command (
?*i#W) supports communication
of standard illuminations to the printer to allow the printer to
compensate for different lighting conditions when appearance
matching.
Viewing Illuminant Command
The Viewing Illuminant command specifies the relative white point
used in the determination of a viewing illuminant condition.
?*i#W[binary data]
The binary data field is formatted as follows:
The above firnat adheres to the IEEE floating point format as follows:
# = Number of binary bytes of data
Default =8
Range = 8 (command is ignored for invalid values; signs in the
value field are ignored
Byte 15 (msb) 8 7 (lsb) 0 Byte
0 x chromaticity white point (lsw) 1
2 x chromaticity white point (msw) 3
4 y chromaticity white point (lsw) 5
6 y chromaticity white point (msw) 7
31 30 23 22 0
Sign Exponent Fractional Portion