Filter
Top Products
6-6 Raster Graphics EN
Raster Graphics Command Sequence
PCL raster commands include: Start Raster Graphics and End Raster
Graphics commands, Transfer Raster Data by Plane and Row, Raster
Compression, Raster Presentation, Raster Resolution, Raster Height
and Raster Width (which define the raster area), and Raster Y Offset
commands. For printing well-behaved raster graphics, the normal
sequence of execution for these commands is shown below.
Hewlett-Packard strongly recommends that developers use this
command sequence in their applications.
Note Although the source raster height and width commands are not
necessary, they improve memory efficiency.
Well-Behaved Raster Command Sequence
Raster Presentation
Raster Resolution
Raster Height
Raster Width
Start Raster Graphics
Y Offset
Raster Compression
Transfer Raster Data
…
Transfer Raster Data
Y Offset
Transfer Raster Data
…
Y Offset
Raster Compression
Transfer Raster Data
…
Raster Compression
Transfer Raster Data
End Raster Graphics