Filter
Top Products
6-10 Raster Graphics EN
Raster Graphics Presentation Mode Command
The Raster Graphics Presentation command specifies the orientation
of the raster image on the logical page.
? * r # F
• A value of 0 indicates that a raster row will be printed in the
positive X-direction of the PCL coordinate system. (The print
direction translates the PCL coordinate system.)
• A value of 3 indicates that the raster graphics will be printed
along the width of the physical page, regardless of logical page
orientation. In portrait orientation, a raster row is printed in the
positive X-direction of the PCL coordinate system and a
subsequent raster row is printed beginning at the next dot row
position in the positive Y-direction. In landscape orientation, a
raster row is printed in the positive Y-direction of the PCL
coordinate system and a subsequent raster row is printed
beginning at the next dot row position in the negative
X-direction. Figures 6-3 and 6-4 illustrate presentation modes
0 and 3.
# = 0 - Raster image prints in orientation of logical page
3 - Raster image prints along the width of the physical
page
Default =3
Range =0, 3