Filter
Top Products
B-18 Using Color Modes (Color LaserJet, 5, 5M, DeskJet) EN
Device CMY (Long Form)
The long form for the Device CMY color space (value field is 18)
provides explicit entry of black and white references (range is –32767
to 32767). Black and white references are used in the direct pixel
encoding modes (2,3) to set relative limits for raster data; they are
also used when specifying the primary components of new palette
entries (
?*v#A, ?*v#B, ?*v#C). Black and white references have
no effect on the default CID palette colors. The reference values are
specified as 16-bit signed integers (sint16).
Note The short form for the Device CMY color space defaults each
primary’s white reference to 0 and black reference to 2
n
–1, where n is
the number of bits for that primary.
CIE L*a*b* (Long Form)
The long form for the CIE L*a*b* color space allows a larger data
range than the short form defaults:
L* = 0.0 to 120.0 (greater than the short form by 20.0)
a* = –159.0 to 128.0 (less than the short form by –32.0 and greater
than the short form by 28.0)
b* = –120.0 to 80.0 (less than the short form by 20.0)
Byte 15 (msb) 8 7 (lsb) 0 Byte
0 Color space Pixel encoding mode 1
2 Bits per index Bits per primary #1 3
4 Bits per primary #2 Bits per primary #3 5
6 White reference for primary #1 (sint16) 7
8 White reference for primary #2 (sint16) 9
10 White reference for primary #3 (sint16) 11
12 Black reference for primary #1 (sint16) 13
14 Black reference for primary #2 (sint16) 15
16 Black reference for primary #3 (sint16) 17