Filter
Top Products
CHAPTER 2:
GETTING STARTED
2.1 ENTERING YOUR SELECTION NUMBERS
HOW AND WHY?
For nearly all keyboard operations discussed in this manual, an associated numeric
entry must be made. For example, when selecting a camera or setting the dwell for a
scan sequence.
The required number is typed in, using the SELECTION PAD on the keyboard. When
the number entered is shorter in length than expected (that is, less digits than expected),
then the
key must be pressed to indicate that the number entered is complete.
An Example:
If the maximum Camera Number used on the system is, as an example, Camera 20, the
system would then always expect 2 digit camera numbers to be entered in selecting any
camera.
To select camera 19, the operator must press the following keys:
If you wish to select camera 1, the operator must press:
As an alternative:
will also select camera 1.
In this case, as the required number of digits was pressed, the
key is not
required.
When there are less than ten possible selections (that is, 0 Ù 9), a single digit is pressed
to make the selection.
Rev. A 2-1 HMXMU001056
03/16/05