Filter
Top Products
8.4 PAN-TILT CONTROL
Message Prompt Explanation
Fixed camera This camera does NOT have any PTZ capability.
Not while scanning Before controlling the PTZ camera on this monitor the current scan
sequence must be halted.
PTZ denied The keyboard operator does not have access to control this PTZ
camera.
PTZ busy Another keyboard operator is currently controlling this camera
PTZ.
PTZ locked All of the camera PTZ control functions have been locked. The
PTZ cannot be controlled until it is unlocked.
PTZ site failed The camera PTZ site receiver has failed. The camera cannot be
controlled until the PTZ site receiver recovers.
Ctrl config. error The PTZ (or VCR) control definition has been incorrectly
configured. Control of this device is not possible until it is properly
defined in the system.
No pan This PTZ camera does not support the pan left/right control
functions.
No tilt This PTZ camera does not support the tilt up/down control
functions.
No focus This PTZ camera does not support control of lens focus.
No Zoom This PTZ camera does not support control of lens zoom.
No iris control This PTZ camera does not support manual iris control.
No wash/wipe This PTZ camera does not support wash and wipe control.
No flashback
This PTZ camera does not support the FLASHBACK control
function.
No views This PTZ camera does not support preset views.
<PTZ aux> This prompt confirms the SHIFT to the auxiliary PTZ control
functions available from the lens keys on the RD-500 control
keyboard for control of wash, wipe and manual-iris.
<Open> The PTZ camera manual iris is opening.
<Close> The PTZ camera manual iris is closing.
<Wash> The wash function of the PTZ is operating.
<Wipe> The wipe function of the PTZ is operating.
<Flashback>
The PTZ camera FLASHBACK function has been operated.
Moving to view (xx) The PTZ camera is moving to the selected preset view (xx).
Set view (00-99) Enter the PTZ camera preset view number to be set (two digits).
Rev. A 8-5 HMXMU001056
03/16/05