Filter
Top Products
4.1.3 Automated Control
The MAXPRO-Net Crosspoint Maxtrix Video Switching System can be configured to
control a variety of equipment other than cameras and monitors. The keyboard actions
used to manually control this auxiliary equipment can also be recorded in a macro for
later play back for automated control of the system.
Selecting cameras to video recorders, activating record, turning lighting on, or opening
door latches and boom gates could all be included in one automated control macro.
Any system action that can be made by an operator at a keyboard can be stored in a
MACRO for later use.
4.2 EXECUTING A MACRO
To execute a MACRO sequence, press the key followed by the two-digit
macro number required. Valid MACRO's are (00 Ù 99).
• for example,
.. executes MACRO (65).
• or
.. executes MACRO (00).
If the macro has been defined, the following message will display briefly on your current
monitor:
The macro will now play back the recorded keystrokes. Salvo camera selections are
played back instantly. Camera Walks are played back in real-time. Automated control
actions can play back as a combination of the two depending on the keypress functions
recorded.
When the macro play back is complete, the following message will display briefly on
your current monitor:
Rev. A 4-2 HMXMU001056
03/16/05