Honeywell MAXPRO-NET Switch User Manual


 
2.4.1 Other PTZ functions
The following PTZ functions may be available as well provided the keyboard being used
supports the function. Refer to your specific keyboard user manual.
ZOOM IN .. by pressing (and holding) the
key. Releasing the key
will halt the Zoom function.
ZOOM OUT .. by pressing (and holding) the
key. Releasing the key
will halt the Zoom function.
FOCUS FAR .. by pressing (and holding) the
key. Releasing the key
will halt the Focus function.
FOCUS NEAR .. by pressing (and holding) the
key. Releasing the
key will halt the Focus function.
IRIS OPEN .. By pressing (and holding) the
key. Releasing the key
will halt the manual-iris function.
IRIS CLOSE .. by pressing and (holding) the
key. Releasing the
key halt the manual-iris function.
WASH .. by pressing (and holding) the
key. Releasing the key
will halt the wash function.
WIPE .. by pressing (and holding) the
key. Releasing the key will
halt the wipe function.
NOTE: With the proper equipment installed, PTZ sites
can have variable speed controls for the Pan/Tilt and
Focus/Zoom functions. When a PTZ function is selected
from the keyboard, you'll have 'half' speed for the first
second. After that, 'full' speed is attained. This allows
faster movement from one point to another. It also allows
greater precision when making minor adjustments for a
proper view.
Rev. A 2-5 HMXMU001056
03/16/05