Filter
Top Products
7.3 SIGN-ON KEYBOARD OPERATORS
In the MAXPRO-Net Crosspoint Matrix Video Switching System, a keyboard must have
an operator identity associated with it before access to the video system is allowed.
• To sign-on a new operator to the keyboard, press the
key. Then, first
option of the menu ’SIGN-ON OPERATOR’ will be displayed. Press
Key, then Valid ‘Keyboard Operator List' is displayed.
CAUTION: If the keyboard was signed-off, pressing the
key will automatically select the first option and
display the 'Keyboard Operators List.'
<MAXPRO-Net Menu>
Keyboard Operator
01-Operator1
04MAR2005 11:50:29
Fig 7.2: Keyboard Operator List
This scrolling menu will traverse through the entire list of system operators that are
allowed access to the video system. To sign-on, select your operator identity and Press
Key.
Each system operator is given a PIN (Personal Identification Number). Having selected
your operator identity, you will be prompted to enter your PIN.
<MAXPRO-Net Menu>
Enter PIN
****
04MAR2005 11:50:29
Fig 7.3: Enter PIN
Enter your four digits PIN followed by the
key. If sign-on is successful, the
menu will exit displaying the original camera on the monitor. The following message is
displayed briefly:
Rev. A 7-3 HMXMU001056
03/16/05